The
battery
charge
status
is displayed in the top right corner of the
display. When the battery is discharged, the battery frame will flash to
indicate the battery needs to be recharged immediately.
The
power
draw
from the battery by the electric bicycle can be read
under the battery charge status indicator in real time.
If there are any
faults
with the electrical system, an error code will
be displayed at the bottom of the display. Consult TEBCO or your
retailer for assistance.
Pedestrian
Function
The Discovery has an in built
6 km/h pedestrian function
so that
the bike can be safely wheeled under power whilst walking beside
it. To activate, hold down the
‘-‘
button for as long as you wish to
walk the bicycle.
Headlights and Taillights
To switch
ON
the headlight and taillight, press the
‘headlight’
button. To switch
OFF
the headlight and taillight, press the
‘headlight’
button again.
NOTE:
The display backlight will
dim
when the headlight and
taillight are illuminated.
PAS Setting
The pedal assist function sets the amount of assistance from the
motor when pedaling. This is adjusted with the
‘-‘
and
‘+’
buttons.
The
default
level is 0 (zero) - no output power. This can be
adjusted between
0 (zero)
and
9 (nine)
as desired by the user.
General Settings Menu
With the bicycle switched on, the general settings menu is accessed by holding both
the
‘+’
and
‘-‘
buttons for two seconds.
To
exit
the menu, hold the
‘i’
button for 2 (two) seconds. Any menu will timeout after
approximately 2 (two) minutes and return to the home screen.
tC - Trip Distance Clearance
To clear the trip distance, press the
‘+’
or
‘-‘
buttons until Y (yes) is displayed.
Press the
‘i’
button confirm and proceed to the next screen in the menu.
