Operating Methods
Before operating:
1. Press
to ‘Power ON’ Transporter – LCD Indicator Panel will activate.
2. If battery status gauge does not show at least half full – recharge before you attempt to
ride. (To extend battery life -
re-charge batteries every time you get home
.)
3. Check both brakes to see if they are both working effectively. Check ‘Honka Hoota’
operation.
4. Check the pressure of front and rear wheels. Pressure should be Min 40psi – Max 65psi
Riding Technique
1. Seat yourself comfortably on seat. If seat too high or too low - adjust to suit your comfort.
2. The
‘Transporter’
is fitted with 2 types of
Power Activation
:
(A)
‘Twist Grip Accelerator Assembly’
- Turn ‘twist grip throttle’ slowly towards you to
accelerate. The further you turn the ‘twist grip throttle’ the more you will accelerate
and the faster your speed.
(B)
‘Pedal Activation System’
– Simply start to pedal and power will automatically be
activated to motor.
3. To decelerate – release ‘twist grip throttle’ or ‘cease pedalling’ and controller will
automatically cut power to motor.
4. Slowly pull on both brake levers to ‘brake’ and slow the bicycle to a stop.
Power ‘Override Switches’
Your Transporter is equipped with 2 power ‘Override Switches’
1. These are small micro-switches situated within each brake lever.
2. By simply pulling either brake lever on slightly – power is cut to the motor.
3. These are safety switches, which can prevent your tricycle from accidentally ‘starting’
whilst you are stationary.
FULL EXPLANATION OF LED TRIP COMPUTER AND PAS
POWER MODE CONTROLLER LATER IN THIS MANUAL.
