ADJUSTMENT NOTES
If the Quick Release Lever can be easily pushed to
the CLOSE position, the clamping strength is
insufficient.
Return the lever to a position at right angles to
the fork.
Turn the Adjusting Nut clockwise to increase the
clamping strength.
Push the lever back to the CLOSE position to check
the clamping strength.
You will need a reasonable amount of force to
CLOSE the lever to ensure the adjustment is
correct.
NOTE: If you are not sure of any of these steps or
how the quick release mechanism operates ask
your tricycle retailer.
REMOVING THE REAR WHEEL
Set the rear gear lever so that the chain can be
moved to the smallest cog.
Release the Brake Quick Release (see Removing
the Front Wheel)
If fitted with axle nuts, use the correct spanner to
loosen the axle nuts enough to allow the wheel to
be removed.
If fitted with a Quick Release Lever, move the lever
into the OPEN position. This allows the wheel to
be removed.
Lift the bike off the ground 30-50mm, push the wheel
forward and down until it comes out of the dropouts.