TRANSPORTING
TRANSPORT SAFETY
1. Make sure you are in compliance with all
local regulations regarding transporting
equipment on public roads and highways.
2. Make sure the SMV (Slow Moving Vehicle)
emblem and all the lights and reflectors that
are required by the local highway and trans-
port authorities are in place, are clean and
can be seen clearly by all overtaking and
oncoming traffic.
3. Do not allow anyone to ride on the Cutter or
skid loader during transport.
4. Do not exceed 20 mph (32 kph). Reduce
speed on rough roads and surfaces.
5. Always use hazard flashers on the loader
when transporting unless prohibited by law.
When transporting the machine, review and follow
these instructions:
1. Be sure all bystanders are clear of the machine.
2. Be sure that the machine is securely attached to
the loader and all pins are in locked position.
3. Clean the SMV sign, lights and reflectors and be
sure they are working.
4. Be sure you are in compliance with all appli-
cable lighting and marking regulations when
transporting. Check with your local authorities.
5. Be sure your machine can clearly be seen by
overtaking and oncoming traffic.
6. Keep to the right and yield the right-of-way to
allow faster traffic to pass. Drive on the road
shoulder if permitted by law.
7. Do not allow riders.
9. Always use the hazard flashers on the
tractor unless prohibited by law.
10. Use pilot vehicles fron and rear when
transporting during times of limited visibility.
15
Summary of Contents for tc10-500-sm
