19
Use for
Side-by-Side
Battery Packs
Use for
Li-Po and Stick
Battery Packs
A4322
Battery Tray, SBS
Battery Pack
(NOT SUPPLIED)
A4324
Fan Coupler
20mm Fan
(Optional)
(NOT SUPPLIED)
Personal Transponder
(NOT SUPPLIED)
Install battery bars at the angles shown
for easy access with direct soldering.
Install up to three cooling fans with the supplied Fan
Couplers.
Install a Personal Transponder in one of two loca-
tions, either as shown, or under the front Differential
(not shown). To install under the Front Differential, the
Eccentric assembly will have to be removed from the
Bulkheads.
•
•
After installing the appropriate Battery
Tray, re-tighten the eight 4-40 x 1/4”
Flat Head Screws that secure the Chassis
Supports.
*Note: It is recommended to do
this in an “X” manner to prevent chassis
tweak. For example: tighten the front right
Screw, followed by the back left, then front
left, followed by the back right. Do this for
the top and bottom Screws.
•
BAG F
BAG F
Battery Installation
STEP F-06
Cooling Fan Installation (Optional)
STEP F-07
4-40 x 1/4”
x4
A6213
2-56 x 1/2”
x4
A6236
2-56 x 1/4”
x4
A6255
4-40 x 1/8”
x3
A6212
