background image

2

Notice

All instructions, warranties and other collateral  

documents are subject to change at the sole discretion  

of Horizon Hobby, Inc. For up-to-date product literature, 

visit http://www.horizonhobby.com and click on the 

support tab for this product.

Meaning of Special Language

The following terms are used throughout the product 

literature to indicate various levels of potential harm 

when operating this product:

NOTICE

Procedures, which if not properly followed, 

create a possibility of physical property damage 

AND a little or no possibility of injury.

CAUTION

:  Procedures, which if not properly followed, 

create the probability of physical property 

damage AND a possibility of serious injury.

WARNING

:  Procedures, which if not properly followed, 

create the probability of property damage, 

collateral damage, and serious injury OR create a 

high probability of superficial injury.

 

WARNING

: Read the ENTIRE instruction manual to 

become familiar with the features of the product before 

operating. Failure to operate the product correctly can result 

in damage to the product, personal property and cause 

serious injury. 
This is a sophisticated hobby product and NOT a toy. It must 

be operated with caution and common sense and requires 

some basic mechanical ability. Failure to operate this Product 

in a safe and responsible manner could result in injury or 

damage to the product or other property. This product is not 

intended for use by children without direct adult supervision. 

Do not attempt disassembly, use with incompatible 

components or augment product in any way without 

the approval of Horizon Hobby, Inc. This manual contains 

instructions for safety, operation and maintenance. It is 

essential to read and follow all the instructions and warnings 

in the manual, prior to assembly, setup or use, in order to 

operate correctly and avoid damage or serious injury.

Introduction

Thank you for choosing the 810. This is a highly developed 

RC model that features a sophisticated radio system and a 

nitro fuel-powered engine. It does require some mechanical 

experience and direct adult supervision. This guide contains 

the basic instructions and drawings needed to operate and 

maintain your new 810. Please take the time to read through 

these instructions completely before attempting to run your 

new model. In addition to the service information available 

in this operations guide, our online Support - Answer 

Center is available at www.losi.com for performance tips 

and troubleshooting questions. 

Your hobby dealer cannot 

under any circumstances accept a model for return or 

exchange that has been run.

 We are confident you will be 

satisfied with the high-speed performance in this durable and 

resilient vehicle. 
Understanding that you are anxiously wanting to get 

your 810 ready for the open road, it will be to your long 

term benefit to make the effort and read through the 

entire manual. In the following pages you will find all the 

information you will need to set up as well as operate your 

new 810 to its full potential.

If you are an experienced RC hobbyist, or new to 

RC vehicles, it will benefit you to read all enclosed 

information.

From everyone at Losi we would like to thank you again for 

choosing the 810. Our goal is helping people have fun and 

enjoy using our products.

Register your Losi Product Online

Register your 810 now and be the first to find out  

about the latest options parts, product updates and more.  

Log on to www.LOSI.com and follow the product registration 

link to stay connected.

Caution:

Age Recommendation: 14 years or over. 

This is not a toy. 

This product is not intended for use by children without 

direct adult supervision.
This vehicle is capable of extreme speed and careful attention 

and care must be used when operating the 810. 
When driving the 810 it is important that you take measures 

to avoid someone being hit by the vehicle. You may cause 

serious injury to another person, or to personal property 

should you make contact while running the 810. Before 

operating the 810 you must read and follow all of the 

following safety precautions and warnings.

Summary of Contents for 810





















Reviews: