background image

18

FCC Information

This device complies with part 15 of the FCC rules. Operation is 

subject to the following two conditions: (1) This device may not 

cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause unde-

sired operation. 
Caution: Changes or modifications not expressly approved by the 

party responsible for compliance could void the user’s authority to 

operate the equipment. 
This product contains a radio transmitter with wireless technology 

which has been tested and found to be compliant with the ap-

plicable regulations governing a radio transmitter in the 2.400 GHz 

to 2.4835 GHz frequency range.

Antenna Separation Distance

When operating your transmitter, please be sure to maintain a 

separation distance of at least 5 cm between your body (excluding 

fingers, hands, wrists, ankles and feet) and the antenna to meet RF 

exposure safety requirements as determined by FCC regulations.
The illustrations below show the approximate 5 cm RF exposure area 

and typical hand placement when operating your transmitter.

Compliance Information for  

the European Union

 

AT

BG

CZ

CY

DE

DK

ES

FI

GR

HU

IE

IT

LT

LU

LV

MT

NL

PL

PT

RO

SE

SI

SK

UK

 Declaration of Conformity

(in accordance with ISO/IEC 17050-1)

No. HH20100823

Product(s): 

LOS 1/8 810 Buggy RTR 

Item Number(s): 

LOSB0021

Equipment class: 

2

The object of declaration described above is in conformity with 

the requirements of the specifications listed below, following the 

provisions of the European R&TTE directive 1999/5/EC:

EN 300-328 

 Technical requirements for  

Radio equipment.

EN 301 489 

General EMC requirements

EN 60950  

Safety

Signed for and on behalf of:
Horizon Hobby, Inc. 

Champaign, IL USA 

Aug 23, 2010

Steven A. Hall

Vice President 

International Operations and Risk Management

 

Horizon Hobby, Inc.

  

Instructions for Disposal of WEEE  

by Users in the European Union

This product must not be disposed of with other waste. 

Instead, it is the user’s responsibility to dispose of their waste 

equipment by handing it over to a designated collection 

point for the recycling of waste electrical and electronic 

equipment. The separate collection and recycling of your 

waste equipment at the time of disposal will help to 

conserve natural resources and ensure that it is recycled in 

a manner that protects human health and the environment. 

For more information about where you can drop off your 

waste equipment for recycling, please contact your local city 

office, your household waste disposal service or where you 

purchased the product.

Summary of Contents for 810





















Reviews: