Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International BELGIUM.
The pages must be reproduced and folded in order to obtain a
booklet A5 (+/- 148.5 mm width x 210 mm height). When folding,
make sure you keep the good numbering when you turn the pages
of the I/B. Don’t change the page numbering. Keep the language
integrity.
Fax +32 2 359 95 50
8
TEAM TO 40 - 090129
CAUTION: the bread carriage handle will not stay down if the appliance is not plugged in!
UK style plug wiring instructions (in the UK only)
This product must only be used from a 13 amp power socket. If a BS1363 approved 13 amp
plug is used, it should be fitted with a 13 amp fuse. The wires on the power cord are colour
coded:
blue = neutral, brown = live, green or green & yellow = earth.
The blue wire must be connected to the terminal marked N or coloured in black.
The brown wire must be connected to the terminal marked L or coloured in red.
The green (& yellow) wire must be connected to the terminal marked E or coloured in green (&
yellow).
BEFORE USING THE TOASTER FOR THE FIRST TIME
In order to eliminate any manufacturing residues, operate the toaster a couple of times
without bread with the browning control selector on a medium power level. Some smoke
might escape.
OPERATION
•
Before using your appliance for the first time, check if it is clean (see “Maintenance and
cleaning”) as it comes into direct contact with bread. Check if any object has fallen into
the slot.
•
In the first time, connect the appliance only to a mains earthed wall socket.
•
Place the bread slices in the slot (for French bread, cut a loaf shorter than the slot, then
cut it in two pieces along its length). Your appliance is provided to receive French bread,
but also pieces of toast or other bread slices if their thickness and their length are shorter
than the one of the slot.
•
Press down the bread carriage handle until it stops (in the same time, the grid inside the
slot will tighten around the bread in order to keep it away from the heating wires). Then
release the pressure and the handle will stay in the lower position, which means that the
heating process has begun. If the handle comes up immediately, check if the appliance is
plugged in as it blocks only when the unit is plugged in.
•
You can adjust the browning intensity to obtain a more or less toasted bread by
positioning the browning control selector to one of the degrees marked from 1 to 6.
Therefore you only have to turn clockwise to increase the intensity, and anticlockwise to
decrease it. The higher the number is, the more toasted the bread will be.
•
During the functioning, if you think that the bread is toasted enough or for another reason,
you can break the heating process, simply by pressing the “CANCEL” button.
•
The "REHEAT" button allows you to reheat already toasted bread or to toast bread which is
not toasted enough during a short time without modifying the browning degree.
•
The “DEFROST” button allows you to toast bread that has been frozen beforehand.
•
Always unplug the appliance after use and let it cool down before handling or storing it.
Assembly page 8/28
