TeachLogic Maxim II, User Manual

Page: 14 / 33

Installation of Speakers
The Maxim II can accommodate four (8 Ώ ) speakers. You will
connect two speakers in parallel and connect to one
amplifier. Do the same for the other two speakers. This will
distribute 8 watt to each sp
eaker. Four speakers will be
ou
d in the
Fo
he listening area and divide the area into four
enter of each
Fo
areas. Relay out the
ront to back) and equidistant side to side of
in the center of each
Installin 8 ceiling speaker
the
tile face down on clean flat surface
adequate to distribute sound evenly throughout a classroom
of approximately 2500 sq. ft.
When installing ceiling speakers in a dropped ceiling, y
need to consider will the room always be arrange
same seating arrangement or be moved about randomly?
r a room with permanent seating arrangement:
Designate t
quadrants. Then install one speaker in the c
quadrant.
r a room with random seating arrangement:
The whole room becomes the listening area. Begin by
splitting the room into four quadrants and skew away
from areas known not to be listening
area and divide into four quadrants and install one
speaker in center of each quadrant.
Smaller rooms may only require two speakers. Two speaker
installation, locate the speakers in the center of the
listening area (f
the listening area. Install one speaker
half quadrant.
g the SP – 62
•
Locate and identify the speaker locations in the
ceiling grid
•
With clean hands, remove the ceiling tile from
ceiling grid
•
Lay ceiling
•
Center the large hole of the tile bridge on the
ceiling tile
•
Trace and cut the speaker hole using a keyhole or
drywall saw