TeachLogic Maxim II, User Manual

Page: 13 / 33

Procedure Installation
In
utlet and the routing of the
pe
fre
e sides of the amplifier
screws provided.
h mounting hardware being used.
the support.
e
rack
•
Mount the tabs on the side of the amplifier
•
Install the Maxim II in the rack at desired location
stallation of the Maxim II
Placement of the Maxim II mixer/amplifier is usually
dictated by: what other equipment will be integrated with
the sound system, and how it will be mounted. Location of
the electrical AC power o
s aker and sensor cables. Cushion pads are installed for
e stance installation.
Installing the Maxim II under or above a shelf
•
Use the SM – 700 shelf mount kit
•
Mount the two tabs on th
using the threaded mounting holes and the
threaded
•
The tabs can be mounted oriented inward or
outward
•
With the tabs mounted, hold the amplifier in
position and mark the mounting holes
•
Drill mounting holes in support structure in
accordance wit
•
With tabs oriented outward, install the Maxim II
onto support
•
With tabs oriented inward, remove the tabs and
install them on
•
Insert and install the amplifier between th
mounted tabs
Installing the Maxim II in an electronic equipment
•
Use the RM – 400 rack mount kit.