Co
t is
no
wer switch
er
e Red LED near the Ch. A volume
k
nto the microphone, slowly turn the
djacent to
phone
nately
, VCR, ipod) using a shielded
nd engage its
uired, adjust
•
Once all the auxiliary inputs have been verified and
adjusted, the system is ready for full operation
ngratulations, this completes the installation and i
w time to show the user how to use the system
•
Turn “on” the Maxim II via the po
•
Plug a microphone into the body-pack and set the
gain control at zero (max. CCW)
•
Turn the body-pack transmitter “on” via slide
switch on the side of the transmitt
•
Observe the Green LED on the body-pack indicating
a useable charge on the batteries
•
Observe th
control, it indicates a signal being received from the
body-pac
•
Turn Ch. A volume to approximately mid scale (12
o’clock)
•
While talking i
gain control CW until you’ve achieved a comfortable
listening level
•
Using the Handheld microphone, turn it “on”, the
Green LED will light and the Red LED a
the Ch. B control will light indicating signal
presence from the handheld micro
•
Slowly turn the Ch. B volume control CW until the
desired listening level is achieved
•
Now venture around the room while alter
talking into each microphone. Observe no
interruption or drop outs while moving about
•
Connect an auxiliary audio source (computer, Video
projector, DVD player
cable with appropriate connectors, plugged into the
designated RCA jack
•
Turn the audio source “on” a
operation. Adjust the volume level of each auxiliary
input to the desired listening level.
•
Computers and remote control projectors often have
very low output. If more volume is req
the respective input sensitivity control on back
panel. Adjust to desired volume level.
Summary of Contents for Maxim II
Page 1: ......
