background image

5

Battery Precautions

Remote Control Unit

<

  Be sure to insert the batteries with correct positive “

+

” 

and negative “

_

” polarities.

<

  Use  batteries  of  the  same  type.  Never  use  different 

types of batteries together.

<

  Either rechargeable or non-rechargeable batteries can 

be used. Refer to the precautions on their labels.

<

  When the remote control unit is not to be used for a 

long  time  (more  than  a  month),  remove  the  battery 
from the remote control unit to prevent it from leaking.

<

  If the batteries leak, wipe away the leakage inside the 

battery  compartment  and  replace  the  batteries  with 
new ones.

<

  Do not use any batteries other than those specified. Do 

not mix new batteries with old ones.

<

  Do not heat or disassemble batteries. Never throw them 

in fire or water.

<

  Do  not  carry  or  store  batteries  with  other  metallic 

objects. Doing so could cause batteries to short circuit, 
leak or explode.

<

  Never recharge a battery unless it is confirmed to be a 

rechargeable type.

The  included  remote  control  unit  allows  the  unit  to  be 
operated from a distance.
When  using  the  remote  control,  point  it  towards  the 
remote sensor on the front of the unit.

<

  Even  if  the  remote  control  is  used  within  its  effective 

operation range (5 m), the unit might not respond to 
the remote if there are any obstacles between them.

<

  The  remote  control  might  function  incorrectly  if  it  is 

operated  near  other  products  that  generate  infrared 
rays or if other remote control devices that use infrared 
rays  are  operated  near  the  unit.  Likewise,  the  other 
products might also function incorrectly.

Battery installation
1.

  Remove the battery compartment cover.

2.

  Put in the lithium battery (CR2032, 3 V).

3.

  Close the cover.

Battery replacement

If the distance to the unit from which the remote control 
can be used decreases, the battery is losing its charge. In 
this case replace the battery with a new one.

<

  For information about the collection of batteries, please 

contact  your  local  municipality,  your  waste  disposal 
service or the place where you purchased them.

Summary of Contents for SR-2DAB

































Reviews: