14
1
Insert the iPod/iPhone into the SR-2DAB dock.
2
Then press the Play/Pause button (
y
/
J
) on the
iPod/iPhone or the SR-2DAB.
The SR-2DAB will automatically turn on and start
playback from the iPod/iPhone’s song list.
<
If an iPod/iPhone that is in playback mode is inserted
into the dock, the SR-2DAB will automatically turn on
and playback sound will be heard from the speakers.
<
Make sure to use a suitable Dock Adapter (page 11).
<
The battery of an iPod/iPhone will be recharged until
it is full whenever the iPod/iPhone is docked and the
SR-2DAB is connected to AC power.
<
If headphones are also plugged into the iPod/iPhone,
sound comes from both the headphones and the
SR-2DAB speakers.
Note for iPod Touch/iPhone
If an iPod touch/iPhone that is in video playback
mode is inserted into the dock while the SR-2DAB
is in the standby mode, the SR-2DAB is not turned
on.
If you want to hear the sound of video from an
iPod touch or iPhone, connect the iPod touch/
iPhone to the Dock first, and then operate the
SR-2DAB and iPod/iPhone.
<
The SR-2DAB might turn on when you play data
for which the audio signal is output earlier than
the video signal.
Listening to an iPod or iPhone (1)
Selecting iPod mode
Select “iPod” using the FUNCTION button. If an iPod/
iPhone is already docked, playback will start.
If no iPod/iPhone is docked, the iPod indicator on the
display blinks.
Stopping playback temporarily
(pause mode)
Press the Play/Pause button (
G
/
J
) during playback to
stop playback at the current position.
To resume playback, press the Play/Pause button (
G
/
J
)
again.
<
You can also use the button on the iPod to pause
playback.
