28
1
Press the FUNCTION button repeatedly to
select “FM”.
2
Select the station you want to listen to.
Automatic selection
Hold down
Hold the TUNING button and release it when the
automatic tuning process starts. When a station is
tuned in, the tuning process will stop automatically.
Repeat this step until the station you want to listen to
is found.
<
To stop the automatic tuning process, press the
TUNING button briefly.
Manual selection
Press the TUNING button repeatedly.
The frequency changes by a fixed step. Press
repeatedly until the station you want to listen to is
found.
About the frequency display
When the decimal point in the frequency display blinks, it
means that the frequency is 0.05 higher than the number
shown.
Example
88.00 frequency
88.05 frequency
FM Mode
Pressing the FM MODE button alternates between Auto
mode and Mono mode.
Auto
When a program is broadcast in stereo, you hear stereo
sound. When in monaural, you hear monaural sound.
<
If the sound is distorted, the signal is not strong enough
for good stereo reception. In this case, change to Mono
mode.
Mono
To compensate for weak FM stereo reception, select
this mode. Reception will now be forced into monaural,
reducing unwanted noise.
If the reception is poor
Extend the FM antenna or change its position to
improve the reception of a station.
Listening to the FM Radio
FM
