Teac PLMSDM1060, User Manual

Page: 26 / 39

23
ADVANCED FUNCTIONS
Variable and Fixed Audio Output
Setting Output Using OSD
You can set the type of output this monitor outputs from its audio output jack located in the rear of the
monitor. By using an OSD based switch, you can easily choose between variable or fixed audio outputs.
To set the audio output setting:
1.
Press the MENU +/- keys on the remote or the front control panel.
2. Use the ADJ +/- keys to navigate to “SOUND” OSD sub-menu.
3. Use the MENU +/- keys to select the AUDIO OUTPUT option.
4. Use the ADJ +/- keys to change setting between FIXED or VARIABLE.
AUDIO OUTPUT
Sets the type of audio output sent from the audio output jacks
located in the rear of monitor.
! !
! !
!
VARIABLE
When set to Variable, audio output is affected by the monitor’s
internal audio controls including bass, treble, surround, BBE,
bass extension, and volume.
! ! ! ! !
FIXED
When set to Fixed, the audio output bypasses the monitor’s
internal audio control so that functions such as bass, treble,
surround, BBE, bass extension, and volume controls have no
effect.
Sound Adjustments
Sound Adjustments Using OSD
Sound adjustments are available to enhance the sound performance of the monitor. These adjustments will
affect the monitor’s built-in speakers and the AUDIO OUTPUT jacks when set to “Variable” (see above
section). To access sound adjustments:
1.
Press the MENU +/- keys on the remote or the front control panel.
2. Use the ADJ +/- keys to navigate to “SOUND” OSD sub-menu.
3. Use the MENU +/- keys to select the various options described in this section.
SRS ® Surround Sound and BBE ® Sound
This monitor is equipped with SRS
®
Surround Sound and BBE
®
Sound Maximizer circuitry. Use SRS Surround Sound to simulate a
surround sound effect if you are not using a multi-channel sound
setup. Use the BBE Sound Maximizer when using the monitor to
playback live performance related audio programs.
BASS
Adjusts the BASS level of the sound. For more bass response,
increase the BASS level.
TREBLE
Adjusts the TREBLE level of the sound. For more vocal and high
frequency response, increase the TREBLE level.
BALANCE
Adjusts the BALANCE level between LEFT and RIGHT channels. A
value of 50 is the center point between LEFT and RIGHT. To shift
the sound towards the RIGHT, increase the value up to 100. To
shift the sound towards the LEFT, reduce the value down to 1.