Teac MCDV-90i, Instruction Manual

Page: 9 / 17

GB-8
VIDEO SETUP PAGE
VIDEO OUTPUT
–
Select CVBS, YPbPr.
TV DISPLAY
4:3PS
–
Select this format to display 4:3 images without
distorting the picture. (In this case, black bands will appear on
left and right of the screen).
4:3LB
–
Select this format when the unit is connected to a 4:3
TV. Wide-screen images are shown on the screen with black bands on the top and bottom.
16:9
–
Select this format to play wide-screen videos in full-screen mode.
TV TYPE
–
Select the system PAL, AUTO, NTSC that corresponds to your TV.
COLOR SETTING
–
Adjust the picture quality: BRIGHTNESS, CONTRAST, HUE, SATURATION.
RESOLUTION
This function allows the user to select the screen resolution for HDMI output.
Note:
•
If your TV or monitor does not support HDCP, a blue screen without a picture appears when playing
DVD discs which are protected by copyright.
•
The HDMI output options depend on the TV system selected (PAL or NTSC).
•
See your TV instruction manual for more information on how to select the video input source.
•
Please make sure your HD TV supports the high resolution selected.
HDMI SETUP
HDMI
–
ON/OFF: Enable or disable the HDMI mode.
AUDIO FORMAT
–
AUTO PCM or OFF.
HDMI DEEP COLOR
–
24BIT, 30BIT or 36BIT.
GENERAL SETUP PAGE
ANGLE MARK - When various angles are available, a camera
symbol appears on the screen to show that the DVD offers
several different angles. Select
“
Off
”
and the camera symbol
will disappear.
SCREEN SAVER
–
ON: Enable the screen saver function.
OFF: Disable the function.
LAST MEMORY
–
ON: Enable this function which enables you
to start the DVD at the point where it was stopped. OFF:
Disable the function.
VERSION
–
To display the software version number.
DEFAULT
–
Restore to factory default settings.
PASSWORD SETUP PAGE
Note: This page is available only in STOP mode.
PARENTAL
You can set up ratings limits and lock your player in order to
control the type of content people watch on your DVD player.
Depending on the disc, you can replace or lock out violent
scenes, or lock out playback of the disc altogether. You can
enter the password to change the parental control level.
PASSWORD - You can change the password to prevent children from accessing the Parental Control
settings. Input the default password
“
138900
”
, then the new password and re-enter the new password.
Press ENTER to confirm the new password.
PARENTAL