background image

6

7

FM antenna

While in FM mode, tune in an FM
station and extend the lead to find the
best position for the reception. This
antenna may need to be repositioned if
you move your unit to a new location.

AM loop antenna

Connect the supplied AM loop antenna
to the AM ANTENNA terminal.
Place the antenna on a shelf or hang it
on a window frame, etc., in the
direction which gives the best
reception.

If you want, you can hook the AM
antenna on a wall as shown below: 

PHONES

For private listening, insert the
headphones plug into this jack, and
adjust the volume using the VOLUME
button.

DST (Daylight Saving Time)

Select ON to put the clock one hour
ahead. Select OFF to turn the DST off.

D

C

B

A

Connections

CAUTION:

<

Switch off the power before making connections.

<

Read the instructions of each component you intend to use with this unit.

<

Be sure to insert each plug securely. To prevent hum and noise, do not bundle the
connection cords.

A

B

C

E

D

AC Power Cord

Plug this AC power cord into an AC
wall socket.

<

Be sure to connect the power cord to
an AC outlet which supplies the correct
voltage.

<

Hold the power plug when plugging or
unplugging the power cord. Never pull
or yank on the power cord.

AUX IN

You can connect a portable audio
player to this jack.
See page 17 for details.

F

E

(front panel of the GR-10i)

Summary of Contents for GR-10i













Reviews: