14
15
Insert the headphones plug into the
PHONES jack, and adjust the volume.
CAUTION
Always lower the volume level prior to
plugging in your headphones. TO AVOID
DAMAGING YOUR HEARING - Do not
place your headphones on your head
until after you have plugged them in.
<
The MUTING indicator lights on the
display to indicate that the muting is
engaged.
<
If you change the volume during the
muting, the muting will be canceled.
Muting
To mute the sound temporarily, press the
MUTING button. Press the MUTING
button again to restore the sound.
SLEEP 90, 60 or 30:
The power will be switched off 90, 60 or
30 minutes later.
Normal display:
The sleep timer is off.
<
When you set the sleep timer, the display
is dimmed automatically.
<
If you want to check the remaining time,
press the SLEEP button once. The
remaining time will be displayed for a
few seconds.
Sleep Timer
You can set a sleep timer so the unit turns
itself off after a specified time.
Press the SLEEP button repeatedly until
desired time appears on the display.
Basic Operation 2
Headphones
Press the iPod button to select “iPod”. If
an iPod is already docked, playback will
start.
When no iPod is docked, the iPod button
and the iPod indicator on the display
blink.
<
You can also use the Play/Pause button
(
y
/
J
) to select “iPod”.
Insert the iPod into the Dock of the GR-
10i.
The unit and the iPod automatically turn on
and start playback.
<
Make sure to use an appropriate Dock
adapter (see “Getting Started” on page
10).
<
If you remove the iPod during playback,
the GR-10i automatically turns standby.
<
The battery of the iPod is recharged to
the full whenever the iPod is docked and
the GR-10i is connected to the AC power
supply.
<
When headphones are plugged into the
iPod, sound comes from both the
speakers of the GR-10i and the
headphones.
Listening to iPod 1
To select iPod mode
