6
Connecting the Antenna
Connecting the Antenna
Connecting the Antenna
Connecting the Antenna
Connecting the Antenna
1. Using the supplied wire Antenna.
2. Using the coaxial type connector .
A 75Ohm antenna with coaxial type connector should be connected to the FM 75 ohm coaxia terminal.
3. If reception is poor, connect the outside antenna.
Note:
Note:
Note:
Note:
Note: Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outside antenna),
disconnect the supplied FM wire antenna.
Caution:
Caution:
Caution:
Caution:
Caution: To avoid noise, keep antennas away from the system, the connecting cord and the AC cord.
Connecting Control Cable
Connecting Control Cable
Connecting Control Cable
Connecting Control Cable
Connecting Control Cable
Connect signal line between the main set and the sub-woofer back board.
Connecting AUX
Connecting AUX
Connecting AUX
Connecting AUX
Connecting AUX
This sub-woofer has two audio input terminals, you can use signal line to connect audio input terminals of this
unit and audio output terminals of other equipment respectively, then you can hear the sound sources.
Caution:
Caution:
Caution:
Caution:
Caution:Press the function select button
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
on the unit or the button
AUX
AUX
AUX
AUX
AUX
on the remote control to
select AUX function. When you are connecting AUX audio terminals, please press this function
button.
Connection
Connection
Connection
Connection
Connection
- / 0
Terminal board for Sub-Woofer
Terminal board for Main Set
Terminal board for Sub-Woofer
Auxiliary Equipment
