Teac DRHN200, User Manual

Page: 21 / 33

17
Clock/T Clock/T Clock/T Clock/T Clock/Timer Functions imer Functions imer Functions imer Functions imer Functions
Setting the Clock
The built-in clock shows the correct time in the display.
- In standby mode, press the clock button (
CLOCK CLOCK
CLOCK CLOCK CLOCK
) , the hour indicator will blink.
- Set the hour with the + +
+ + +
button or - -
- - -
button.
- Press the clock button (
CLOCK CLOCK CLOCK CLOCK CLOCK
), the minute indicator will blink.
- Set the minute with the
+ +
+ + +
button or
-----
button.
- Press the clock button (
CLOCK CLOCK CLOCK CLOCK CLOCK
, the built-in clock starts operating and the seconds start counting
from 0.
Note: Note: Note: Note: Note:
Š
The operating time of every step shouldn’t be longer than 10 seconds or it will return to the
original display.
Š
If there is a power failure or the power system is turned off, the clock will lose its setting.
T T T T To confirm the clock time o confirm the clock time o confirm the clock time o confirm the clock time o confirm the clock time
When you press the clock button (
CLOCK CLOCK CLOCK CLOCK CLOCK
), the clock time is displayed. Wait for a few seconds until
the display returns to the original display.
Setting the Daily T Setting the Daily T
Setting the Daily T Setting the Daily T Setting the Daily Timer
imer
imer imer imer
In standby mode with the clock time having been set, you can use the daily timer setting to turn the
unit on automatically at a certain time everyday under standby mode. When the setting timer is on,
the timer indictor “ ” will display on the VFD, however the clock must be set correctly for the timer
function to work.
- In standby mode, press the timer button (
TIMER TIMER TIMER TIMER TIMER),
the hour indicator will blink.
- Set the hour with the
+ + + + +
button or
-----
button.
- Press the timer button (
TIMER TIMER TIMER TIMER TIMER
)
, the minute indicator will blink.
- Set the minute with the
+ + + + +
button or
-----
button.
- Press the timer button (
TIMER TIMER TIMER TIMER TIMER
), the selected time is set. Then set the daily timer to “ON” (daily
timer set is in effect) or “OFF” (daily timer set is to cancel) by pressing the
+ + + + +
button or
-----
button.
Note: Note:
Note: Note: Note:
Š
You can only set the daily timer only in standby mode and the clock timer had been set.
Š
The operating time of every step shouldn’t be longer than 10 seconds or it will return to time
display.
Š
The sound source of the “timer on” mode is the same as the sound source when the unit was
turned off by the standby switch.
T T
T T To confirm the daily time
o confirm the daily time
o confirm the daily time o confirm the daily time o confirm the daily time
Press the timer button (
TIMER TIMER
TIMER TIMER TIMER
) in standby mode, the daily time is displayed. Wait for a moment
until the display returns to the time display.