TROUBLESHOOTING GUIDE
If you experience difficulties in the use of this Docking System, please check the
following or call 1300 553 315 for TEAC Customer Support Hotline.
Symptom
Possible Problem
Solution
The unit does
not respond (no
power).
AC Adaptor is not plugged
into a wall outlet or the
connector is not plugged
into the power supply jack
on the back of the unit.
Plug the AC adaptor into a wall outlet and
plug the connector into the supply jack on the
unit. Connections must be secure.
Wall outlet is not
functioning.
Plug another device into the same outlet to
confirm the outlet is working.
iPod/iPhone
does not
respond to the
system.
iPod/iPhone is not
installed properly.
Remove your iPod/iPhone from the dock and
check for obstruction on the connectors in the
dock and on your iPod/iPhone. Then reseat it
on the dock.
Your iPod/iPhone is
locked up.
Please make sure that your iPod/iPhone is
working properly before docking into the unit.
Please refer to your iPod/iPhone manual for
info on resetting the iPod/iPhone.
iPod/iPhone
does not charge.
Unit turned to CD or radio
mode.
Select other modes for iPod charging.
iPod/iPhone is not
installed properly.
Remove your iPod/iPhone from the dock and
check for obstruction on the connectors in the
dock and on your iPod/iPhone. Then reseat it
in the dock.
iPod/iPhone is locked up/
frozen. iPod/iPhone
battery has problems.
Please make sure your iPod/iPhone is
working properly before docking into the unit.
Please refer to your iPod/iPhone manual for
details on resetting.
Weak FM
reception
FM antenna wire is not
fully extended.
Extend or reposition the wire antenna for best
reception.
CD player will
not play
- Unit not in CD function
mode.
- CD is not loaded
properly.
- If the CD is self-
compiled, the media
used may not be
compatible with the
player.
- Select CD function mode.
- Load CD with label side up.
- Use better quality blank media and retest.
CD skips while
playing
- Disc is dirty or
scratched.
- Wipe CD with clean cloth or use another disc.
Intermittent
sound from CD
player
- Dirty or defective disc
- Dirty pick up lens
- Player is subject to
excessive shock or
vibration
- Clean or replace the defective disc.
- Use a CD lens cleaning disc to clean the
lens.
- Relocate the player away from shock or
vibration.
20
REFERENCE
