408-35043
Rev
D
15
of 30
2. While holding down the spring-loaded detent pin, turn the adjustment head clockwise until the detent
pin can be removed.
DANGER
The spring-loaded pin can injure you if released unexpectedly.
3. Invert the pin so that the locking end contacts the detent plate (Figure 15).
Figure 15: Inverting the detent pin
1
Detent orientation
2
Lock orientation
4. Reinstall the pin and spring.
5. While holding the pin down, turn the adjustment head until the proper set-up dimension is reached.
6. Verify the crimp height as shown in section 5.1.
CAUTION
When changing crimp height while in the locked orientation, the spring-loaded detent pin must be depressed to rotate the
number ring. Failure to do so damages the ring.
