TE Ocean 2.0, Instruction Sheet

Page: 30 / 30

408-35043
Rev D
30 of 30
2. Use Table 2 to determine which crimper spacers you need to achieve the required thickness.
Table 2: Crimper spacers, by thickness
Thickness
mm [in.]
Crimper spacer
part number
Thickness
mm [in.]
Crimper spacer
part number
Thickness
mm [in.]
Crimper spacer
part number
0.25 [.010] 455888-1 1.52 [.060] 1-455888-2 2.67 [.105] 2-455888-3
0.30 [.012] 455888-2 1.57 [.062] 1-455888-3 2.67 [.105] 2-455888-3
0.38 [.015] 455888-3 1.65 [.065] 1-455888-4 2.79 [.110] 2-455888-4
0.51 [.020] 455888-4 1.78 [.070] 1-455888-5 2.92 [.115] 2-455888-5
0.66 [.026] 455888-5 1.91 [.075] 1-455888-6 3.18 [.125] 2-455888-7
0.79 [.031] 455888-6 2.03 [.080] 1-455888-7 4.37 [.172] 2-455888-8
0.89 [.035] 455888-7 2.16 [.085] 1-455888-8 5.08 [.200] 2-455888-9
1.02 [.040] 455888-8 2.29 [.090] 1-455888-9 3.63 [.143] 3-455888-2
1.14 [.045] 455888-9 2.36 [.093] 2-455888-0 3.56 [.140] 3-455888-7
1.27 [.050] 1-455888-0 2.41 [.095] 2-455888-1 4.83 [.190] 7-455888-2
1.40 [.055] 1-455888-1 2.54 [.100] 2-455888-2
3. Choose a wire depressor based on the wire size range (Table 3).
Table 3: Wire depressors, by wire size range
Wire size range Wire depressor part number
0.008-1.305 mm² [38-16 AWG] 2119791-5
0.150-5.270 mm² [20-10 AWG] 2119791-9
4. Order the replacement components you need.

Crimper spacers (chosen in step 1)

Wire depressor (chosen in step 3)

Washer spacer (part number 2119943-1)
NOTE
When fitting crimper spacer PN 455888-5 or 455888-6 to the applicator, use only the wire depressor and corresponding
spacer.
7. CLEANING, LUBRICATION, AND STORAGE
For best performance and minimum downtime, the applicator should be cleaned (daily and monthly), inspected,
lubricated, and stored as indicated in instruction sheet
408-8059 .
8. REVISION SUMMARY
Revisions to this instruction sheet include:

Reformatted to current standard for instruction sheets.

Edited and reorganized the entire document.

Updated information about feed cams in sections 2.2 and 2.3.