manualshive.com logo in svg

TE Energy 2510B, User'S Operating Instruction And Installation Manual, Page: 3 / 40

Share
Download
TE Energy 2510B User'S Operating Instruction And Installation Manual Download Page 3

 

Vers. 001

 

Energy 2510 B

 

GB

3

7.4   Maintenance operations to be carried out by qualified personnel............................................. 22

 

7.4.1   Engine oil replacement ...................................................................................................... 22

 

7.4.2   Air filter maintenance ......................................................................................................... 22

 

7.4.3   Spark plug maintenance .................................................................................................... 23

 

7.4.4   Voltage adjustment ............................................................................................................ 23

 

 
8   ROUTINE MAINTENANCE SCHEDULE......................................................................................... 24

 

 
9   PROLONGED INACTIVITY ............................................................................................................. 25

 

 
10   DISMANTLING .............................................................................................................................. 25

 

 
11   RECOMMENDED FIRE-FIGHTING EQUIPMENT........................................................................ 25

 

 
GENERAL WARRANTY TERMS ......................................................................................................... 26

 

 
WIRING DIAGRAM ENERGY 2510 B .................................................................................................. 27

 

 
DRAWING FOR SPARE PARTS LIST ENERGY 2510 B .................................................................... 29

 

 

 

 
 
 
 
 

 

 

 

 

 

 
 

When the generator remains idle for at least three weeks, old unleaded 
petrol sediments could build up inside the carburettor. These sediments 
can seriously damage the engine and it is therefore COMPULSORY that 
the carburettor be completely emptied prior to a long period of non-use: 
do this by turning off the fuel tap and running the generator set until it 
stops. 
It is also essential that you never use old unleaded petrol, as it can 
undergo chemical modifications and seriously damage the engine. 
Failure to observe these instructions automatically renders the 
WARRANTY NULL AND VOID. 

 
 

Summary of Contents for Energy 2510B









































Reviews:

No comments