TE Connectivity CQM II, Original Instructions Manual

Page: 51 / 74

412-10100
Rev A
51 of 74
Table 13: Crimp height history data (only shown for production mode crimps)
Field Description
Crimp result PASS or FAIL from crimp height analysis
Measured crimp height Crimp height value from the crimp height analysis
UCL Upper control limit
LCL Lower control limit
Nominal crimp height Crimp height desired and set in the part
Control limit Value calculated or set in the part
Calculate control limit True or false
Crimp height tolerance Allowable tolerance set in the part
Table 14: Peak force history data (peak force analysis)
Field Description
Peak force result PASS, FAIL, or LEARN from peak force analysis
Force Peak force value from the peak force analysis
UCL Upper control limit
LCL Lower control limit
Sensitivity Sensitivity setting for the peak force analysis
Table 15: Work index history data (work index analysis)
Field Description
Work index result PASS, FAIL, or LEARN from work index analysis
Work index Work index value from the work index analysis
UCL Upper control limit
LCL Lower control limit
Sensitivity Sensitivity setting for the work index analysis
Table 16: P2P history data (point to point analysis)
Field Description
P2P result PASS, FAIL, or LEARN from point to point analysis
Value Point to point value from the point to point analysis
Table 17: FFT history data (fast Fourier transform analysis)
Field Description
FFT result PASS, FAIL, or LEARN from FFT analysis
Value FFT value from the FFT analysis
Above count Number of frequencies that are above the mean
Below count Number of frequencies that are below the mean
Failure code Code for internal use
Sensitivity Sensitivity setting for the FFT analysis
Threshold Threshold level in % for FFT analysis
Force threshold Actual force value of the threshold