(1)
DISPLAY: The screen displays such as kit number, names and other information.
(2)
POWER: Turns ON/OFF the sound module.
NOTE: When you turn the power off, do not turn it on immediately. Wait at least five seconds to turn
the power on so that the electronic circuits can properly reset.
The sound module will shut down automatically if there is no operation in 20 minutes, in order to save
energy. To disable this function, power on the module while pressing on snare rim.
(3)
HEADPHONE VOL: Rotate this knob to adjust the output level of headphone and line out.
Rotate it clockwise to increase volume.
(4)
EDIT: Press this button to configure drum kits.
(5)
SETUP: Press this button to edit system parameters.
(6)
MODE: Press to change the playing mode for demo songs.
(7)
CLICK: Switch and set up the metronome.
(8)
TEMPO: Change the speed of metronome and demo songs.
(9)
KIT: Press to select kits.
(10) DEMO: Press to play demo songs and user songs.
(11) ENTER: To confirm operation or enter submenu.
(12) SCROLL WHEEL: Rotate to change value, kit, or demo. Press this button to adjust master
volume.
(13) EXIT: To cancel operation or back to root menu.
(14)
Record button: Press it to record user songs.
(15)
Play and stop button. Press to stop playing current song or recording. For details, please
refer to related chapter.
(16)
¨
PAD BUTTONS: In edit mode, press these buttons to select and listen to the corresponding
pad.
SOUND MODULE
CONTROL PANEL
5
1
2
3
4
5
6
7
8
9
11
12
10
13
14
15
16
DD 503
