BA-PZ3_ML / F0354400
21
10
Troubleshooting
Fault / error
Cause
Rectification
Device cannot be started or
plasma extinguishes during
operation.
Mains failure.
Check electrical power supply.
Mains fuse triggered.
Check mains fuse.
Mains plug not making contact
correctly.
Check seat of mains plug.
Mains plug is defective.
Replace mains plug.
There is an internal error.
De-energise device. Switch on
again.
Piezo crystal broken, the
plasma generator is defective.
Contact customer service.
Shutdown due to overheating.
Allow the plasma generator to
cool down. Ensure that the fan
grille is not covered so that
enough ambient air can be
drawn in.
Plasma extinguishes during
operation and device emits
several short acoustic signals
Indication on the display:
„Plasma
-
failure“
Device does not find a
permissible operating
frequency.
Piezo element broken. Remove
the defective module and insert
a new one.
Arcing on conductive substrate
with e.g. "Standard" module.
Use a module suitable for the
substrate, e.g. module
“
Nearfield
”
.
No conductive substrate in
sufficient proximity to e.g.
module "Nearfield
”.
Reduce the distance to the
substrate or use a module
suitable for the substrate, e.g.
module
“
Standard
”
As explained above, indication
no the display:
“
Fan-failure
”
Fan is defective.
Contact customer service.
As explained above, indication
no the display:
“
overheated
”
The device reached a
impermissible inner
temperature.
Allow the device to cool down.
Check whether the air inlet and
the nozzle outlet are not
covered.
Error message in display:
„No module inserted“
Module was not detected.
Check whether the module is
inserted deep enough in the
device.
If necessary, remove the
module and reinsert it.
If necessary, insert a new
module.
Error message in display:
„invalid module inserted“
The module used is not
compatible with the device.
Please contact customer
service.
Should these actions not remedy the problem, please contact relyon plasma GmbH.
(ES) Equipements Scientifiques SA - Département Composants & Modules - 127 rue de Buzenval BP 26 - 92380 Garches
Tél. 01 47 95 99 84 - Fax. 01 47 01 16 22 - e-mail: [email protected] - Site Web: www.es-france.com
