TDK-Lambda HFE1600 SERIES User Manual Download Page 37

Page: 37 / 40

8.14.7 Manufacturing Date

Syntax: SYST:DATE?
Example:

SYST:DATE? May return 12/12/2016

8.14.8 Serial Number

Syntax: SYST:SER?
Example:

SYST:SER? May return DOD705BED0171W

8.15 Inventory Details of the LAN Module

8.15.1 Software Revision

Syntax: SYST:COMM:LAN:VERS?
Example:

SYST:COMM:LAN:VERS? May return 1.28.18

8.15.2 Serial Number

Syntax: SYST:COMM:LAN:SER?
Example:

SYST:COMM:LAN:SER? May return 12345

8.16 LAN Specific Commands

8.16.1 Read the Hostname

Syntax: SYST:COMM:LAN:HOST?
Example:

SYST:COMM:LAN:HOST? May return HFE-LAN-222

The hostname string is up to 15 characters long

8.16.2 Read the IP Address

Syntax: SYST:COMM:LAN:IP?
Example:

SYST:COMM:LAN:IP? May return 10.97.4.233

The IP address string is up to 15 characters long

8.16.3 Read the MAC Address

Syntax: SYST:COMM:LAN:MAC?
Example:

SYST:COMM:LAN:MAC? May return 00:19:f9:00:24:3b

The MAC address string, 17 characters long

8.16.4 Reset LAN Settings

WARNING: Sending this command will disable the LAN connection to the module

This command will reset the LAN settings to the factory default state. The effect

of this includes changing the IP address and hostname, so LAN communication

could be lost. Therefore, use this command as a diagnostic tool only.
Syntax: SYST:COMM:LAN:RES
Example: SYST:COMM:LAN:RES

Note: Reset does not affect SNMP enable/disable setting

8.16.5 Blinking the Blink Identity LED

Syntax:

SYST:COMM:LAN:IDLED 1 or ON, 0 or OFF

Example:

SYST:COMM:LAN:IDLED 1

8.17 Scan for active power supplies

This command scans for active power supplies, returns the location in the rack.
Syntax: SYST:SCAN?
Example

SYST:SCAN? may return PS:0,2,4

Summary of Contents for HFE1600 SERIES









































Search results

Summary of Contents for HFE1600 SERIES

Reviews:

Related manuals for HFE1600 SERIES

Brands by name

Popular brands

TDK-Lambda HFE1600 SERIES, User Manual

Search results

Summary of Contents for HFE1600 SERIES

Reviews:

Related manuals for HFE1600 SERIES

Brands by name

Popular brands