This section can be used for programming a group of supplies. As soon as the
supplies are selected from the drop down menu, they will appear in the box
next to it. Click on “Set Group”. Select the operation – ON/OFF, Voltage or Current
Setting or Max Voltage Setting. Click “Apply”.
Note – This section must be used for supplies of the same type. Mixing of models
can create unexpected results.
No other copy of web page should be open.
The user setting must be set to “One Client only”. Refer to Section 5.5.2
5.4.3 DC Power
➔
Utility Page
This page is used to send any command and see the response. It is a learning
tool for operations. It allows commands which are not present on the web pages.
Type any message into the top text box. Click the “Send and Read” button.
For commands, there is no response. For queries, the response is shown in the
bottom text box.
Fig 7. Utility Page
23
Summary of Contents for HFE1600 SERIES
Page 39: ...39 ...
Page 40: ...IA817 04 01A Z0020951 40 ...
