TDI TDI-Dynaload WCL488 Series, Operation & Programming Manual, Page: 90 / 130

WCL488 Series Water Cooled Electronic Loads
Operation & Programming Manual
TDI-Dynaload Division
Page 80
402828, Rev. B1
SS Slew Slow
Description This command is used to set the slew rate limiter to the slow range.
In the slow range, full-scale rise and fall times can be programmed
between 1,000
µ
s and 400,000
µ
s using the SR, S1 or S2 commands.
NOTE:
Maximum slew rate is highly dependent on factors including
power source, source to load wiring and operating mode.
Command Syntax
SS
Example SS
Sets the slew rate limiter to the slow range.
Query Syntax NONE
Returned Parameters NONE