12
Assembly Instructions
6. Insert the 25 amp fuse by opening the footplate cover as shown.
Insert the fuse into the fuse holder then close the footplate cover.
7. Install the seat
• Place the seat (A) on the steel stem (B) and
tighten.
• Place the clamp (C) on the top of the black seat
base(D). Make sure you put the correct end of the
clamp on the seat base. You will see a lip on the
inside of the clamp, this lip indicates the top of the
clamp.
• Insert the steel stem (B) into the black seat base
(D).
• Tighten the clamp and tighten the screw to keep
the seat in place.
• Insert the seat into the scooter deck.
• Tighten all bolts on the plastic seat stem cover.
Remember to keep the area into which the seat is inserted clean and greased
or else you will find it difficult to remove the seat and access the batteries.
