TCS TCF EVO Line, Original Instruction Manual

Page: 22 / 133

TCF EVO Line and TCF X Line
Preparations before initial commissioning
22
When using the
TC-Ax module, the communication line must be connected to the SUB
D socket on the rear (see Fig.9).
If the bus system module
is used in
addition to the TC-Ax module, the RJ 45 socket must be used for the
communication line (see Fig.10).
Abb 9) SUB D socket
Abb 10) RJ 45 only with modular bus system
5. If the maintenance unit module is present and a pneumatic
screwdriver is available, fill oil into the reservoir of the mist lubricator
up to the maximum level mark (in depressurised state).
Abb 11) Fill the oil into the mist lubricator.
6.
Type of oil: Only use the type of oil recommended by the
manufacturer of the screwdriver.
7. Check all connections of the cables and hoses for tightness.
Fill with oil,
After filling
reseal
ATTENTION:
For units with
electric drive, no
oil is required in the
mist lubricator!