TCS PUK Series, Product Information

Page: 5 / 16

5 11/2012
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88 Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129

Mail: info@tcsag.de PI_PUK-uk 1 A
Short description

for up to 30 flats

win:clip
™ principle

name plate size: H from 19 mm to 53 mm x W 62 mm

information field size: H from 19 mm to 37 mm x W 62 mm

bell buttons made of metal with gold-plated, maintenance-free contacts

each bell button can be allocated with two indoor stations

long-life and energy saving name and information plate illumination

shatter-proof name plate glass

acknowledgement tone when pressing the bell button

communication time ex works: 56 sec / adjustable with Service Device or configo
TM

any bell button can be used to switch the light, light symbol enclosed

volume and microphone sensitivity can be adjusted manually

plug-in memory to easily replace front-door stations identical in construction

R-terminal to connect an extended function - door release

door release time at R-terminal ex works: 3 sec / can be adjusted with configo
TM

door standby time (to control the short-term memory within the indoor station) ex works:
56 sec / adjustable with configo
TM

voice communication within the door standby time / adjustable with Service Device or
configo
TM
win:clip system
The device is equipped with the win:clip system, thus opening and closing the station can
be realised without screws.
Open the housing
1.
Push the enclosed win:clip key into the small opening
within the loudspeaker cover.
Press the key into the opening until stop and keep it
in this position.
2. Push the name plate glass slightly upwards until it
jumps out.
3. Put out the glass.
4. Remove the win:clip key.
Close the housing
1.
Push the enclosed win:clip key into the small opening
within the loudspeaker cover.
Press the key into the opening until stop and keep it
in this position.
2. Push the name plate glass under the loudspeaker
cover.
3. Press the name plate glass onto the device. Push it
slightly downwards until it snaps-in.
4. Remove the win:clip key.