3/2013
13
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94 - 9 88 11 88
Subject to technical changes.
Fax: +49 (0) 41 94 - 9 88 129
E-Mail:
PI_PAK_uk 1A
3
End
Power supply and control unit
press shortly
LED is ON
programming mode of the system is OFF
1) If a Progsperr tone sounds instead, a programming lock is set in the front-door station. The programming
lock can only be removed with the Service Device TCSK-01 or the configuration software configo
™
Delete the programming
Before an already programmed bell button can be reprogrammed, the previous program-
ming must be deleted.
1
Initiate
Power supply and control unit
press shortly
LED blinks
Programming mode of the system is ON
2
Delete button
press until the delete melody sounds
1)
release
3
End
Power supply and control unit
press shortly
LED is ON
programming mode of the system is OFF
1) If a Progsperr tone sounds instead, a programming lock is set in the front-door station.
The programming lock can only be removed with the Service Device TCSK-01 or the configuration software
configo
™.
