3/2013
11
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94 - 9 88 11 88
Subject to technical changes.
Fax: +49 (0) 41 94 - 9 88 129
E-Mail:
PI_PAK_uk 1A
1
Initiate
Power supply and control unit
press shortly
LED blinks
Programming mode of the system is ON
2a
Programming via voice connection
or
establish voice connection
to the front-door station
press button shortly
... a ring tone sounds at the front-door
and indoor station
1)
2b
Alternative:
programming via floor push button
(if the indoor station is not accessible)
+
Press floor push button 2 times in
quick succession, each time a ring
tone sounds
press button shortly
... a ring tone sounds at the front-door
station and at the indoor station
1)
Repeat the steps, until all bell buttons are programmed.
3
End
Power supply and control unit
press short LED is ON
Programming mode of the system is OFF
1) If a Progsperr tone sounds instead, a programming lock is set in the front-door station. The programming
lock can only be removed with the Service Device TCSK-01
