6
10/2012
TCS TürControlSysteme AG, TCS Hotline Germany: [email protected]
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
PI_AVC11010-uk 1A
Open the housing
1.
Push the enclosed win:clip key into the small
opening within the loudspeaker cover.
Press the key into the opening until stop and keep
it in this position.
2.
Push the name plate glass slightly upwards until it
jumps out.
3.
Put out the glass carefully.
Remove the plug of the name plate illumination.
4.
Remove the win:clip key.
Close the housing
1.
Connect the plug of the name plate illumination
(see installation).
2.
Push the enclosed win:clip key into the small
opening within the loudspeaker cover.
Press the key into the opening until stop and keep
it in this position.
3.
Push the name plate glass under the loudspeaker
cover.
4.
Press the name plate glass onto the device. Push
it slightly downwards until it snaps-in.
5.
Remove the win:clip key.
Install the front-door station
1.
Open the front-door station (see win:clip system).
2.
Perforate carefully the foam cover on the backside of the device.
3.
Insert the lines through the cable gland.
4.
Install the front-door station at both attachment holes with suitable screws to the wall.
!
Please observe that no line is clamped below the spacer at the backside of the
front-door station.
