10/2012
11
TCS TürControlSysteme AG, TCS Hotline Germany: [email protected]
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
PI_AVC11010-uk 1A
3
Programming via voice connection
Establish voice connection
to the front-door station
shortly press
the button
... a ring tone sounds at the front-door
and indoor station
1)
4
End
shortly press LED is ON
Programming mode of the system is switched OFF
a) Not necessary, if the bell buttons have not been programmed, compare product information of the front-door station.
1) If there sounds a Progsperr tone instead, the front-door station is equipped with a programming lock.
The programming lock can be deactivated only with the Service Device TCSK-01 or the configuration software
configo™.
Legend
Shortly press the button
Busy tone
Press button until
Negative acknowledgement tone
(bell button already programmed)
Release the button
LED blinks
Negative acknowledgement
signal (NoProg tone)
LED blinks quickly
Delete-tone melody
LED is ON
Prog2 tone (start of the pro-
gramming of the 2. serial no.)
Ring tone
Repeat
Progsperr tone
Further
Period of time (e.g. 6 s)
◄6s►
