TCS ASI11000, Product Information

Page: 41 / 80

41
Allocating a second indoor station to a bell button
If two indoor stations are to be called by pressing one bell button, the serial
number of the second indoor station can be allocated additionally to this bell
button.
If more than two indoor stations are to be called with one bell button or e.g. bell button
and floor push button should have the same functionality, only the function parallel
allocation can be used. Thus, only one serial number is allocated to the bell button, the
allocation of further indoor stations is realised with the parallel allocation to the first
indoor station.
The parallel allocation must be set with the Service Device (see manual, configure
comfort telephones) or the configurator configo
TM
.
Note : Repeated programming of an already programmed bell button
changes only the second serial number.