TCO ICon Pro, User Manual, Page: 28 / 33

28
Figure 21
7. Carefully place the new filter into the compartment (Figure 21, pos. 1).
Make sure that:
•
the arrows on top of the filter are visible;
•
the arrows point in the direction of the outlet airflow;
•
you handle the filter with great care to avoid any damage to the gasket on the filter.
The side of the filter with the gasket
MUST be directed towards the fan.
8. Push down the two yellow locking levers (Figure 21, pos. 2) to lock the filter.
9. Close the compartment panel (Figure 21, pos.4).
10. Turn the two knobs on the compartment panel (Figure 21, pos. 5) clockwise until the panel is
locked.
7.3 Recommended additional cleaning
Keep the unit clean by wiping it with a dry cloth. Do not use any liquids to clean the ICon Pro.
Occasionally clean the air inlets (front and bottom) with a vacuum cleaner and/or a dusting brush.
Always disconnect and unplug the ICon Pro before cleaning it.
Cleaning the inside of the ICon Pro is not necessary. All main components are not accessible and are
self-cleaning.
7.4 Ordering replacement filters
Always order your replacement filters using suppliers article codes.
For distributor address and contact data: see page 2.