TCO ICon Pro, User Manual, Page: 15 / 33

15
5.1.1 Unboxing your ICon Pro
1. Always keep the box in the upright
position, according to the labelling on the
box.
2. Open the front box flaps (Figure 7, pos. 2
and 6).
•
Inside you will see the honeycomb
paper boards protecting your ICon Pro.
3. Remove the front honeycomb paper board.
•
You will see your ICon Pro as shown in
Figure 7.
4. Remove the left and right honeycomb
paper boards (Figure 7, pos. 3 and 7).
5. Remove the double honeycomb paper
board from underneath your ICon Pro
(Figure 7, pos. 4).
6. Unlock the caster wheels (Figure 7, pos. 5)
and pull your ICon Pro out of the box.
7. Remove the honeycomb paper board on
top of your ICon Pro (Figure 7, pos. 1).
8. Remove the plastic bag from your ICon Pro.
Your unit is unpacked and ready for use.
9. Check if the power cable and user manual
are in the box. If not, immediately inform
your supplier.
10. Now, when you plug the power cord into
the ICon Pro and the power outlet, the unit
will be ready to work.
Figure 7