TCL VFD 700 Repair Document Download Page 15

Page: 15 / 77

L2E Repair Document

TCL

Communication Ltd.

Rev.

VFD 700 Level 2 Enhance Repair Document

Page

1.0

15/77



Battery TEMP

I. It will display the value of battery temperature, current, battery voltage, capacity

rate and battery present if it functions well;

II. Press “Pass” to continue.



I. Bluetooth will search automatically and it will display device address if it

functions well;

II. Press “Pass” to continue.



WIFI

I. It will search for WIFI hot spot and it will display searched result on the screen if

it functions well;

II. Press “Pass” to continue.



GPS

I. It will run GPS and search for satellite, and then it will display info such as

“PRN”, “SNR”, etc. on the screen if it functions well;

II. Press “Pass” to continue



FACTORY RESET

It will do the factory reset automatically if you press the item.

Summary of Contents for VFD 700














































































Search results

Summary of Contents for VFD 700

Reviews:

Related manuals for VFD 700

Brands by name

Popular brands

TCL VFD 700, Repair Document

Search results

Summary of Contents for VFD 700

Reviews:

Related manuals for VFD 700

Brands by name

Popular brands