21
Settings
7.5.2 LAN
Local area network (LAN) parameters are displayed here. The default Gateway address is
192.168.1.1.
The default Subnet Mask is 255.255.255.0.
DHCP Server will automatically assign IP addresses to devices in the network, it is enabled by
default.
7.5.3
Bandwidth.control
Bandwidth control lets you limit the amount of bandwidth available to connected clients.
You can enable
Bandwidth.control
and set the
Downlink.bandwidth.limit
and
Uplink.bandwidth.
limit
for the specified devices. Set the value to 0 if you don't want to limit the bandwidth for a
device.
7.5.4
WAN.ping
For improved security, your device will not respond to ping commands when this function is
disabled.
7.5.5
LAN.IP.filter
By default, any device connected to your device is allowed to access the internet. You can use the
IP filter to block specific devices from accessing the internet.
y
Disabled: users are allowed to access all the IP addresses.
y
Whitelist: users are allowed to access IP addresses in this list only.
y
Blacklist: users are not allowed to access IP addresses in this list.
7.5.6
MAC.filter
By default, any device can connect to your device. You can use the MAC filter to block specific
devices from accessing your device by MAC address.
y
Disable: all MAC addressses are allowed to access the router.
y
Whitelist: only the MAC addresses in this list are allowed to access the router.
y
Blacklist: MAC addresses in this list are blocked from accessing the router.
7.5.7 DDNS
Dynamic DNS (DDNS) is a method of updating domain names in real time. This service is used to
provide a domain name for a device that may change its IP address on the network.
7.5.8 DMZ
If external users cannot access certain network services provided by the LAN, you can enable
DMZ
and set a new Host IP address. Click
to enable it. Enter an appropriate Host IP address and
then click
Apply
.
Note:
Clients in the DMZ will be exposed to WAN traffic.
Summary of Contents for HH500V
Page 1: ...USER GUIDE HH500V...
