11
Getting started with your device
3.3 Connect in WiFi mode and WPS mode
3.3.1 Connect in WiFi mode
Following are 3 steps to connect in WIFi mode.
Step.1:.
Enable WiFi on your device.
When the WiFi indicator is solid blue, WiFi is enabled.
Step.2:.
Record the SSID and WiFi password.
The default SSID and WiFi password are printed on the device label, situated on the
underside of your device.
To prevent unauthorised parties from accessing your WiFi network, it is recommended that
you change the SSID and WiFi password from time to time. For more information, refer to “7.
Settings”.
Step.3:
Set up a WiFi connection.
y
Set up a WiFi connection manually:
1) Scan for wireless networks from your WiFi enabled client.
2) Connect to the network name that matches the SSID found on the device label.
3) When prompted for a password, enter the WiFi password found on the device label (this is
case sensitive). Your client will notify you when it is connected.
y
Set up a WiFi connection through WPS. For details, see “3.4.2 Connect in WPS mode”.
3.3.2 Connect in WPS mode
Your client must support WPS. There are 3 ways to set up a WPS connection.
Option.1:.
via WPS button
1) Press and hold the WPS button for 3 seconds. The WiFi indicator will begin to flash blue.
2) Enable WPS on your personal device within 2 minutes.
3) Your personal device should then be connected to your device wirelessly.
Option.2:.
via
Start WPS
button in Web UI
1) Open the WPS page on your Web UI.
2)
Go to
Settings.
>
WiFi
>
WPS.
3) Click on
Start WPS
.
4) Enable WPS on your personal device within 2 minutes.
Summary of Contents for HH500V
Page 1: ...USER GUIDE HH500V...
