background image

• Do not operate equipment that is visibly damaged.
• Do not immerse the device in water or other liquids.
• Place the appliance in a place where it cannot be knocked over.
• Please unplug the power plug when cleaning, maintenance or equipment.
• Do not cover the cables with carpets or other objects. Position the unit
so that the cables do not trip over others.
• Do not operate the equipment in rooms containing flammable substances,
gases or vapors.
• Do not leave the appliance in the rain and do not use it in a damp room

• The power cord must not get stuck in the door or crushed by other heavy
objects! Do not move the device during operation.
• Children 8 years of age, older and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge may
use this device if they have been supervised or instructed in the safe
use of this device and understand the hazards involved . Little child
should not operate this equipment. Children should not clean and maintain
this equipment without supervision.
• If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
--Adjust the direction or position of the receiving antenna.
--Increase the distance between the equipment and the receiver.
--Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

This device contains a license-exempt transmitter/receiver that

complies with the Innovation, Science and Economic Development Canada
license-exempt RSS standard. The operation is subject to the following
two conditions:
• This device may not cause interference.
• This device must accept any interference, including interference that
may cause undesired operation of the device
• This device complies with FCC and IC RF radiation exposure limits set
forth for an uncontrolled environment. , Antennas for Tsai transmitters
must be installed and operated so that everyone is kept at least 20 cm
apart and cannot be installed or operated in conjunction with any other
antennas or transmitters. The installer people must ensure that a 20cm
separation distance is maintained between the device (excluding the
mobile phone) and the user.
• Persons (including children) with reduced physical, sensory or mental
capabilities or lack of experience and knowledge should not use this
equipment unless their use of this product has been supervised or
instructed by those responsible for their safety. Supervise children to
ensure they do not operate this machine.
• WARNING: The user is not allowed to replace the UV-C emitter.

Summary of Contents for breeva Pro 700 Premium

























Reviews: