Page 31
Scanning for channels can take several minutes.
Tip
:
Repeat the channel scan from time to time to make sure you are receiving all of the latest
channels. Broadcasters add and remove channels, move channels to different parts of the
spectrum, and change the power levels of their channels periodically.
Note
: You’ll have to repeat the channel scan if you remove the
Antenna TV
tile from the
Home
screen or perform a factory reset. To repeat the channel scan at any time, go to
Settings > TV
inputs > Antenna TV > Scan again for channels > Start finding channels
. Your antenna reception
and picture quality depend on the position of your antenna and on your location relative to the
antennas of broadcasters in your area.
Now, you’re ready to watch broadcast TV! While you’re watching, try the following:
•
Press the
UP
and
DOWN
arrows to change channels.
•
Press the
LEFT
arrow to display the channel list and then use the
UP
and
DOWN
arrows to select
a channel to watch. Or press
REWIND
or
FAST FORWARD
to jump through the channel list a
page at a time.
•
Press
OK
to display information about the current program.
•
Press to switch to the previously tuned channel.
•
Press
Þ
to see options for picture and sound settings.
Note:
If is not available on your remote control, you can use on the Roku App or the Jump
Back button on a universal remote. For more information, see “
Other devices
” on page
75
.
“
Roku TV Remote
” on page
11
has more information on using the remote control buttons while
watching TV.
Summary of Contents for 55US5800
Page 8: ...Page ii...
