TCL 46P11FZE, Service Manual

Page: 11 / 116

Factory Alignment Specification
Test Alignment Specification for MT62S-LA.doc (Page 5 of 16)
2. Final Assembly Alignment
2.1. Entering to “Factory Menu”
ƽ
To enter into Factory Menu in case of “ Factory Hotkey ” is disabled, please to follow
below steps :
- P ress Remote Control key “ MENU ” to display main menu, and move the cursor to
“Contrast” in “Picture” sub-menu.
- press Remote Control keys
sequentially:
“ 9 ”, “ 7 ”, “ 3 ” and “ 5 ”
ƽ
To pop-up Factory Menu while “ Factory Hotkey ” is enabled, please follow below step :
- P ress Remote Control key “ Blue ”
ƽ
To exit “ Factory Menu ”, press “ Exit ” key on Remote Control.
ƽ To comeback to “ Factory Menu ” root when you are into a sub-menu:
- Press Remote Control “ Menu ” key.
2.2. ADC Calibration
Two inputs require ADC calibration for the time being:
ƒ
PC
Input signal: 1024×768@60Hz , White-Black squares .
Select “ Auto Color ” in ADC submenu, then press ” OK ” to start.
ƒ
CMP
Input signal: 720@60Hz , 100% 8-step Color Bar .
Select “ Auto Color ” in ADC submenu, then press ” OK ” to start.