21
The “Descale” symbol will
appear and...
... the espresso button will
flash.
9. Press the espresso button to
start the descaling process.
The “Descale” symbol will
flash.
The descaling process begins.
The descaling process takes approx. 15 minutes.
The machine pumps descaling solution into the pipes several times at 40-second
intervals. Each time about 50 ml is dispensed into the container.
10. Pour out the descaling solution
dispensed by the machine in
good time to ensure that the
container does not overflow.
Once the process is com-
plete, the “Descale” symbol
and the “Refill water”
symbol will appear and...
... the espresso button will
flash.
11. Remove the water tank from the
machine.
12. Clean the water tank thoroughly
as described in the “Cleaning the
water tank” section of the
“Cleaning” chapter. The rinsing
process will now start.
Rinsing process
13. Place an empty container
(with a capacity of at least 500
ml) underneath the coffee spout.
Remove the drip tray if necessary.
This container will need to be
emptied several times during
the rinsing process.
14. Fill the water tank with cold tap
water
up to the MAX mark
.
15. Reinsert the water tank into the
machine and push it down as far
as it will go.
The “Refill water” symbol
will disappear and the
rinsing process will begin
automatically after a few
seconds.
