13
First-time use (Initial operation) / Rinsing the machine
7. Rinsing the machine
Pour away the water that is in the cup and rinse the
machine twice as described in the next section. The
machine is then ready for use.
m
Rinsing the machine
After switching the machine on for the first time or if you
have not used the machine for more than two days, rinse
the machine by allowing two cups of water to flow through
it (without a capsule).
1.
Fill the water tank with fresh, cold tap water or drinking
water up to the MAX mark.
2. Place an empty cup underneath the spout.
The lever must be down.
3. As soon as the three coffee selection buttons remain
permanently lit, press the middle one.
The pump will flush water through the pipes which will
then run into the cup underneath.
4. Pour away the water that is in the cup.
5. Repeat steps 2 to 4.
6. Finally, empty the drip tray. To do this, pull out the
entire unit and remove the grid.
MAX
+
