19
Adjusting the strength of the coffee
Adjust the strength of the coffee to suit your personal
taste by adjusting the quantity of water. You can do this
for one single brewing procedure or save the setting.
Adjusting the strength for the current brewing
procedure (without saving the setting)
If the coffee is
too weak
, you can stop the water flow
prematurely by pressing the flashing coffee selection
button.
If the coffee is
too strong
, start the brewing procedure
again without inserting a new capsule. Press the button
as soon as sufficient water has run through.
Setting the strength permanently (saving the setting)
You can change the factory settings for the water flow
permanently. This enables you to make your favourite
coffee every time at exactly the strength you prefer.
You can customise the
setting for each type of coffee:
Default settings:
Espresso
approx. 40 ml
Caffè crema
approx. 125 ml
Filter coffee
approx. 125 ml
The water quantity can be set between approx.
30 and 300 ml.
m
m
one setting for espresso (white cup), another for caffè
crema (yellow cup) and another for filter coffee (blue cup).
1.
Proceed in the same way as for brewing coffee:
fill the water tank, insert a capsule and place a cup
beneath the spout.
2. Press and hold the relevant coffee selection button
until the required quantity of coffee has run into the
cup.
3. When you release the button, the machine will save
that quantity.
If the settings are not to your taste, simply repeat the
procedure to change them again.
Restoring the factory settings
You can restore the original settings for the water
quantity.
1. Press the On/Off switch to
switch the machine off.
2. Press and hold the upper
and lower coffee selection
buttons and switch the
machine on.
3. Release the buttons.
The factory settings for the water quantity have been
restored.
+
Adjusting the strength of the coffee