TCE Group S.r.l.
Installation, use and maintenance manual
–
Serie NEOS
19
WARNINGS
When handling and installing the product, it is necessary to provide for the use of personal protective equipment (PPE) such as:
-
Clothing
:
Complies with the essential safety requirements in force to protect against minor mechanical damage.
-
Gloves
:
Operating in areas with voltage and live parts, it is necessary to use CE-marked gloves as PPE that protect against all the
risks just analyzed.
-
Safety shoes with non-slip sole
:
They are necessary in all works where there is a risk of a potentially dangerous piece falling.
-
Safety goggles:
They are necessary in all works where there is a danger that an object and/or material could be thrown into the eyes of an
operator.
UNPACKING INSTRUCTIONS
The device is delivered in a cardboard box. Inside the box you will find:
•
Device complete with power cord and DC cable
•
Instruction manual
•
Any compliant accessories if requested by the customer when ordered
INSTALLATION LOCATION
It is good to keep in mind some aspects before proceeding with the handling, installation and subsequent use of the device. In
particular, it is necessary to check some factors:
•
The product storage area must be chosen so that it cannot be hit by water, steam jets and corrosive acids. It must never
be subjected to atmospheric agents before installation.
•
It must be fixed on a linear surface.
•
Temperature range of use -30 ° C to +65 ° C
•
Storage temperature range -40 ° C to + 95 ° C
•
Maximum relative humidity conditions of the air:
o
Up to 80% non-condensing during storage;
o
Up to 95% in use;
•
The device can be installed both indoors, provided they are well ventilated, and outdoors.
•
Altitude up to 2000mt
HANDLING
It must be kept in mind that, even if carefully protected and packaged, the device must be considered and handled with care and
attention.
Before moving the device, check the integrity of the device and its parts. If you find any damage, lack, deformation or traces of
collisions, notify the authorized assistance service before proceeding with the following operations.
Manual handling
The weight of the assembled device, because of its heavy weight, can be manually handled by using the side handles accessory
supplied on request to TCE Group S.r.l. or with dedicated lift machineries.
